Jamming detection, encrypted communication channels encryption and devices authentication
Pings every 12-300 seconds to monitor the system
Tamper protection: available
Second-generation intelligent control panel with
- four communication channels
- a new powerful processor
- tripled RAM capacity
- doubled flash memory capacity.
The Hub Plus monitors the operation of all Ajax detectors and instantly alerts the owner and the security company (if connected).
Uses Wi-Fi, Ethernet, WCDMA and GSM to send alarms to the Central Monitoring Station and the system’s owner
Sends a notification in case of electrical power loss and operates for up to 16 hours from battery backup
Checks the functionality of detectors at least every 12 seconds
Protects large areas 🏬
The Hub Plus is designed to protect large facilities with a great number of rooms and people. New powerful processor and increased memory capacity have expanded the capabilities of the control panel: up to 150 detectors and 50 cameras can be connected to the Hub and you can add 99 users and create 25 groups for room security management.
Uses all possible alarm transmission methods 📶
The Hub Plus is the absolute leader in field in the number of communication channels: the control panel can be connected to the Internet via Wi-Fi, Ethernet, WCDMA, and GSM. Taken together, these functions ensure ultra-stable connection and instant alarm sending to the owner’s smartphone and the Central Monitoring Station.
Increases stability by 4 times 🍀
The Hub Plus is equipped with a GSM module with two SIM-card slots that support 2G and 3G networks. Now you can use SIM-cards of two different communications providers without any risk of communications failures. The Hub instantly switches between 2G and 3G networks. If one SIM card does not respond, the second one is activated automatically.
The Hub Plus makes it possible to use redundant Internet connection by connecting the central unit to networks of two independent communications providers: the main — via Ethernet, and the backup — via Wi-Fi. If connection of one provider fails, the hub will stay connected and continue monitoring the situation at the site.
Installation and set up 👨🔧
The Hub Plus has a Wi-Fi module now, so it is not necessary to lay a cable for connection to the router. The control panel is ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. The device can be mounted in just a few minutes using the SmartBracket mount.
Mounted in 5 minutes
Placed in any room within a Wi-Fi signal range
Mobile application for configuring and testing
HUB Plus Control Panel
Wireless Security Control Panel with WiFi, 3G and dual SIM. RF Frequency: 868.0-868.6 MHz. Jeweller Protocol. Communication:
WiFi 2.4 GHz (802.11 b/g/n), Ethernet, dual SIM 2G (GSM900/DCS1800) / 3G (WCDMA 900/2100) Housing material: ABS plastic. Power supply: AC 110 ~ 250 V, 50/60 Hz. Temp. Operation: 0 ° C ~ +50 ° C. Dimensions: 162.7 x 162.7 x 35.9 mm.